Canon imageFORMULA ScanFront 220eP Kurulum Kılavuzu - Sayfa 38

Tarayıcı Canon imageFORMULA ScanFront 220eP için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. Canon imageFORMULA ScanFront 220eP 44 sayfaları. High-speed document scanners
Ayrıca Canon imageFORMULA ScanFront 220eP için: Broşür ve Teknik Özellikler (26 sayfalar), Broşür ve Teknik Özellikler (6 sayfalar), Broşür ve Teknik Özellikler (33 sayfalar), Cep Kılavuzu (32 sayfalar)

13.

Fingerprint Sensor (ScanFront 220eP)

The ScanFront 220eP is equipped with a fingerprint sensor for registering fingerprints and authenticating users.

The fingerprint sensor is a precision component. Be careful when handling this sensor.

❏ Cautions for Handling the Fingerprint

Sensor

● The following actions may damage the fingerprint

sensor or cause it to malfunction. Read this

information carefully to avoid damaging the

sensor.

– Dropping an object on the fingerprint sensor, or

otherwise subjecting it to a strong impact

– Scratching the surface of the fingerprint sensor,

or poking it with a pointed object

– Pressing a hard object such as a fingernail or

metal item against the fingerprint sensor,

resulting in scratches being created on the

surface of the fingerprint sensor

– Touching the fingerprint sensor with dirty hands,

which might scratch or dirty the surface of the

fingerprint sensor

– Placing a sticker on the surface of the fingerprint

sensor, or covering the surface with ink or

another substance

● If fingerprint authentication fails frequently, the

fingerprint sensor may be dirty. Clean the surface

of the fingerprint sensor regularly.

Fingerprint Sensor

● When cleaning the fingerprint sensor, use a soft

dry cloth to wipe dirt off the surface.

● Do not use a pointed object to remove any dirt that

accumulates around the fingerprint sensor. Doing

so may cause the fingerprint sensor to

malfunction.

● Touching the fingerprint sensor while charged with

static electricity may cause the fingerprint sensor

or device unit to malfunction. Before touching the

fingerprint sensor, discharge any static electricity

by touching a piece of metal. Be especially careful

during dry periods, such as the winter season,

when the likelihood of being charged with static

electricity is high.