Canon Microfilm Scanner 500 Kullanım Kılavuzu - Sayfa 25

Tarayıcı Canon Microfilm Scanner 500 için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Canon Microfilm Scanner 500 48 sayfaları.

When you select the paper tray, the current paper size

appears briefly on the print display. Make sure that the

displayed size matches the paper size in the paper

tray. A mismatch will produce an error when you try to

print. If the sizes do not match, re-setting the paper

size as follows.

If using the paper tray, set the paper size of the paper tray.

(1) Press the cassette select key and keep on for about 5 seconds

to enter the paper size select mode, until the lamp of the paper

tray (

) starts blinking. At that time, the current paper size ap-

pears on the print display.

(2)Then, press the plus/minus key to set the correct paper size.

The size indicator is displayed on the print display as follows.

Letter

Legal

Ledger

(3) Press the cassette select key to complete the setting.

6. Set the number of prints that you want to make.

To increase or decrease the number of prints:

Press the plus or minus key on the keyboard or operation panel to

change the setting as required. The setting appears in the adjacent

Print display. You can select a value from 1 to 99.

To restore the default (1 copy):

You can reset the number to 1 by pressing the Clear/Stop key.

7. Now make the appropriate film mode settings if required. (➞22)

8. To begin printing, press the Print Start key on the keyboard or

operation panel.

You can cancel printing at any time by pressing the Stop/Clear

key.

OPERATING PROCEDURES