ASTRO-MED Dash 8Xe Hızlı Başlangıç Kılavuzu - Sayfa 7

Veri Kaydediciler ASTRO-MED Dash 8Xe için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. ASTRO-MED Dash 8Xe 15 sayfaları. Data acquisition recorder

Sayfayı Yazdır

Set Channel #1 to be

20 Volts Full Scale

Input battery voltage into

Channel #1

Measure the battery

voltage using the color

display

Dash 8Xe / Dash 8X Amplifier Channel Settings Window

Choose Setup >> Amplifier Channel Settings from the menu bar.

Highlight Waveform 1.

Span adjustment keypad

Press the Span column. Press the digit "2" and "0" to select twenty. Press

OK.

Use the banana jack input connection located on the side of

the Dash 8Xe / Dash 8X and input the battery voltage into Channel #1.

Choose View >> Meter from the menu bar to activate the Meter Mode.

Observe the battery voltage.

Choose View >> Meter from the menu bar to remove the meter.

Remove battery voltage.

This completes the first part of the exercise, Realtime Monitoring.