Cojali Jaltest SST Kullanıcı Kılavuzu - Sayfa 6
Test Ekipmanları Cojali Jaltest SST için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Cojali Jaltest SST 15 sayfaları. Speed sensor tester
Sayfayı Yazdır
1.4 FUNCTIONS AND CONNECTIONS
Function table:
DEVICE STATUS
OFF
START MODE
«ACTIVE SENSOR READ
SELECTION» MODE
«PASSIVE SENSOR READ
SELECTION» MODE
«ACTIVE SENSOR
SIMULATION SELECTION»
MODE
«PASSIVE SENSOR
SIMULATION SELECTION»
MODE
«ACTIVE SENSOR READ»
MODE
«PASSIVE SENSOR READ»
MODE
«ACTIVE SENSOR
SIMULATION» MODE
«PASSIVE SENSOR
SIMULATION» MODE
During the navigation trough different modes, the user will be able to detect the mode
to be selected through lighting of LEDs involved, which will flash simultaneously. In
addition, in this mode, LEDs of the possible errors to be detected will light up.
Connections:
Warning: To prevent possible errors, ensure that you have selected the correct mode
for the desired connection.
To connect Jaltest SST device to sensor or ECU, the multipin kit should be used as
follows:
Jaltest SST
Jaltest SST
Function
connector
connector
Sensor power
Red
supply (+)
Black
Ground (-)
Blue
SIGNAL
* Depending on the vehicle mode, it may be necessary to connect the device ground to the vehicle chassis (see
IMAGE 5
in the
connection diagram
Note: An incorrect connection cannot damage the device, since it is protected against polarity inversion.
SHORT PRESS
START MODE
CHANGE TO
«ACTIVE SENSOR READ
SELECTION» MODE
CHANGE TO
«PASSIVE SENSOR READ
SELECTION» MODE
CHANGE TO «ACTIVE SENSOR
SIMULATION SELECTION»
MODE
CHANGE TO «PASSIVE
SENSOR SIMULATION
SELECTION» MODE
CHANGE TO
«ACTIVE SENSOR READ
SELECTION» MODE
IT RESETS
PRESENT ERRORS
IT RESETS
PRESENT ERRORS
IT CHANGES SIGNAL
FREQUENCY AND RESETS
PRESENT ERRORS
IT CHANGES SIGNAL
FREQUENCY AND RESETS
PRESENT ERRORS
Connect to ACTIVE sensor
Simulation
YES
YES
YES
section).
LONG PRESS
-
-
CHANGE TO
CHANGE TO
«ACTIVE SENSOR READ»
«ACTIVE SENSOR READ»
MODE
MODE
CHANGE TO
CHANGE TO
«PASSIVE SENSOR READ»
«PASSIVE SENSOR READ»
MODE
MODE
CHANGE TO
CHANGE TO
«ACTIVE SENSOR
«ACTIVE SENSOR
SIMULATION» MODE
SIMULATION» MODE
CHANGE TO
CHANGE TO
«PASSIVE SENSOR
«PASSIVE SENSOR
SIMULATION» MODE
SIMULATION» MODE
CHANGE TO
«START» MODE
CHANGE TO
«START» MODE
CHANGE TO
«START» MODE
CHANGE TO
«START» MODE
Connect to PASSIVE sensor
Read
Simulation
YES
YES
YES
NO*
YES
YES
6
English
EXTRA-LONG PRESS
-
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
IT TURNS OFF THE DEVICE
Read
YES
NO
YES