Canon EF 75-300mm f/4-5.6 III USM Talimatlar - Sayfa 2
Kamera Lensi Canon EF 75-300mm f/4-5.6 III USM için çevrimiçi göz atın veya pdf Talimatlar indirin. Canon EF 75-300mm f/4-5.6 III USM 2 sayfaları. Ef zoom lenses
Ayrıca Canon EF 75-300mm f/4-5.6 III USM için: Talimatlar (2 sayfalar), Talimatlar Kılavuzu (14 sayfalar), Talimatlar (2 sayfalar), Talimatlar (2 sayfalar), Talimatlar (2 sayfalar)
Sayfayı Yazdır
4. Hood
The lens hood can keep unwanted light out of the lens, and
also protects the lens from rain, snow, and dust.
Fit the hood to the hood mount, then turn it in the direction
of the arrow to attach it securely
.
❻
The hood can be reverse-mounted on the lens for storage
• Part of the picture may be blocked if the hood is not
attached properly.
• When attaching or detaching the hood, grasp the base of
the hood to turn it. To prevent deformation, do not grasp
the rim of the hood to turn it.
5. Filters
You can attach filters to the filter mounting thread on the
front of the lens.
• Use a polarizing Canon filter.
The lens length is measured from the mount surface to
the front end of the lens. Add 21.5 mm when including
the lens cap and dust cap.
The size and weight listed are for the lens only, except as
indicated.
Aperture settings are specified on the camera. The
camera automatically compensates for variations in the
aperture setting when the camera is zoomed in or out.
All data listed is measured according to Canon
standards.
Product specifications and appearance are subject to
change without notice.
Case and hood not provided with some models.
Filters sold separately.
Specifications
Diagonal
EF55-200mm f/4.5-5.6 USM
43°-12°
EF55-200mm f/4.5-5.6 II USM
43°-12°
EF80-200mm f/4.5-5.6 USM
30°-12°
EF75-300mm f/4-5.6 II USM
32°11'-8°15' 18°11'-4°35'
EF75-300mm f/4-5.6 III USM
32°11'-8°15' 18°11'-4°35'
EF90-300mm f/4.5-5.6 USM
27°-8°15'
CT1-7566-005
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may cause
undesired operation.
Do not make any changes or modifications to the equipment
.
❼
unless otherwise specified in the instructions. If such changes
or modifications should be made, you could be required to stop
operation of the equipment.
This equipment has been tested and found to comply with the
limits for a class B digital device, pursuant to part 15 of the FCC
Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if
not installed and used in accordance with the instructions, may
cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur
in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the
following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Consult the dealer or an experienced radio/TV technician for
help.
This Class B digital apparatus complies with Canadian ICES-003.
Angle of view
Lens
Minimum
construction
aperture
Vertical
Horizontal
25°-7°
36°-10°
13-13
22-27
25°-7°
36°-10°
13-13
22-27
17°-7°
25°-10°
7-10
22-27
27°-6°50'
9-13
32-45
27°-6°50'
9-13
32-45
15°10'-4°35' 22°40'-6°50'
9-13
38-45
Min. focusing
Max. magnification and field of view
distance
55 mm:0.06X/406 × 615 mm (16"×24.2")
1.2 m/3.94 ft
200 mm:0.21X/112 × 166 mm (4.4"×6.5")
55 mm:0.06X/406 × 615 mm (16"×24.2")
1.2 m/3.94 ft
200 mm:0.21X/112 × 166 mm (4.4"×6.5")
80 mm:0.07X/366 × 546 mm (14.4"×21.5")
1.5 m/4.92 ft
200 mm:0.16X/153 × 226 mm (6"×8.9")
75 mm:0.07X/372 × 558 mm (14.6"×22")
1.5 m/4.92 ft
300 mm:0.25X/95 × 142 mm (3.7"×5.6")
75 mm:0.07X/372 × 558 mm (14.6"×22")
1.5 m/4.92 ft
300 mm:0.25X/95 × 142 mm (3.7"×5.6")
90 mm:0.08X/311 × 464 mm (12.2"×19.4")
1.5 m/4.92 ft
300 mm:0.25X/95 × 141 mm (3.7"×5.6")
© CANON INC. 1998
❻
●
❼
●
Max. diameter
Filter diameter
and length
70.4 × 97.3 mm
52 mm
(2.8"×3.8")
70.4 × 97.3 mm
52 mm
(2.8"×3.8")
69 × 78.5 mm
52 mm
(2.7"×3.1")
71 × 122.1 mm
58 mm
(2.8"×4.8")
71 × 122 mm
58 mm
(2.8"×4.8")
71 × 114.7 mm
58 mm
(2.8"×4.5")
Weight
Hood
Case
310 g/10.9 oz
ET-54
LP1016
310 g/10.9 oz
ET-54
LP1016
260 g/9.1 oz
ET-54
LP1014
495 g/17.3 oz
ET-60
LP1019
480 g/16.8 oz
ET-60
LP1019
420 g/14.8 oz
ET-60
LP1019
2010.6