AIR GUARD AG-800X Kullanıcı Kılavuzu - Sayfa 7

Buharlaştırıcılar AIR GUARD AG-800X için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. AIR GUARD AG-800X 16 sayfaları. Antibacterial vaporizer

Sayfayı Yazdır

transmitter within 15 seconds after power is turn on. When new transmitter is registered previous

transmitter will be automatically deleted.

Transmitter battery replacement

If the effective distance seems to decrease, it is possible the battery level is low and requires

replacement. In order to replace the battery, undo the three screws on the back of transmitter to

release the cover. Replace with the same type and specification of battery which is 27A 12V

Fluid

Service and Maintenance

Do not allow the machine to become contaminated.

․

Remove dust from air vents with air compressor, vacuum or a soft brush.

․

Only use a damp cloth to clean the casing.

․

Before storing run distilled water through the system to help prevent condensing the pump or

․

heater.

It is recommended to run the machine on a monthly basis in order to achieve best

․

performance and output condition.

Excessive dust, liquid and dirt built up will degrade performance and cause overheating.

․

Fuse Replacement

Disconnect AC power before resetting the breaker. Only replace fuse with same type

and rating.

Step 1: Disconnect AC power.

Step 2: Use a flat-head screwdriver to release fuse holder.

Step 3: Replace fuse with exact same type and rating as indicated below.

Step 4: Reinsert fuse holder

Use Air Guard Antibacterial Solution for AG-800X. The machine

is tested and calibrated with these authorized fluids to achieve

the best performance. Warranty will be void, if any other type

of liquid is used. Improper use of liquid may lead to machine

failure and danger.