flyingwings Venturi EVO 2 FPV Montaj Kılavuzu - Sayfa 6

Dronlar flyingwings Venturi EVO 2 FPV için çevrimiçi göz atın veya pdf Montaj Kılavuzu indirin. flyingwings Venturi EVO 2 FPV 10 sayfaları.

Attaching wings to fuselage

IMPORTANT !

The tube spars are a tight fit in the wings, to help

assembly, use insert the spars into the wings with

twisting action making them easier to insert when

you come to assemble the wings.

Bench

Mark each spar at the centre point

Slide the two carbon tube spars through the

fuselage, short on at the front.

Use a small amount of glue to hold the spars in

place

Run a small bead of UHU Por up each spar,

Slide the wing down the spars

Mark out where the wing will join the fuselage

and use plenty of glue.

Check the front and back of the wings for

alignment.

repeat for the other wing