Canon XJ95x8.6B Kullanım Kılavuzu - Sayfa 8

Kamera Lensi Canon XJ95x8.6B için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Canon XJ95x8.6B 44 sayfaları. Bctv zoom lens

Sayfayı Yazdır

1 HOW TO MOUNT

1-1 Mounting the Lens onto

the Camera

Mounting the Lens onto the Large-

sized Camera

Make sure that the panning and tilting mechanism

of the cam head on the tripod/pedestal is securely

locked.

Turn the mount lock knob of the camera 90 degrees

counterclockwise as viewed from the lens. Also,

remove the protection plate/cap from the camera.

Remove the connector cap(s) on the rear surface of

the lens and the dust cap.

Carefully holding the lens with both hands, mount it

by hanging the V-wedge of the lens over that of the

camera, with aligning the lens locating pin of the lens

with U-shaped groove of the V-wedge of the camera.

V-Wedge

Mounting Pin

V-Wedge

U-Shaped

Lens Locating

Groove

Mount Lock

Knob

Pin Hole

CAUTION

The lens is quite heavy. When lifting the lens, use both hands to

hold two recessed handles on both side of the lens shroud, and

assure the correct lifting posture.

Failure to do so may cause the lens to drop, resulting in damage to

the lens and/or injury.

After lining up the lens correctly, press the lens

toward the camera, and at same time make sure that

the mounting pin at the bottom of the lens mount is

fitted securely into the corresponding pin hole on the

camera. Then, turn the mount lock knob of the camera

clockwise (to the direction indicated by the arrow/see

the figure below) to secure the lens to the camera.

V-Wedge

Mounting Pin

NOTE

• The connector(s) on the lens and the camera are connected

automatically by performing steps 4 and 5. If an attempt is made

to connect them forcibly without lining up the spring pin with the

pin hole as described in step 5, the lens and camera connectors

may be damaged.

• After installing all units, including the operation's accessories, on

tripod or pedestal, adjusting work for balance of the cam head is

required.

Mounting the Lens onto the Portable

Camera

When using the portable camera, the supporter to mount the

lens is required.

Depending on the camera models, the supporters which

can be used with a camera differ. For details, contact your

Canon dealer or your Canon sales representative.

V-Wedge

U-Shaped

Lens Locating

Groove

Mount Lock

Knob

Pin Hole