Astrolite Power 616 II Kullanıcı Kılavuzu - Sayfa 3

Aydınlatma Ekipmanları Astrolite Power 616 II için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Astrolite Power 616 II 4 sayfaları.

Single phase connection

1. Output: 6 single tap terminals for positive without jumping

2. Ground wires with terminals jumped together

3. All neutral wires with terminals already jumped together

4. Input: All three of these terminals for powering

OUTPUT

GROUND NEUTRAL

Three phase connection

5. 6 single tap terminals for positive without jumping

6. Ground wires with terminals jumped together

7. All neutral wires with terminals jumped together

8. All three of these terminals for powering

OUTPUT

GROUND NEUTRAL

push shift and function button to go running mode. Then use up or down to set up the

value. If the item at DMX mode and the DMX signal is correct, the DMX led will

flash.

You can use ch1-ch6 up or down buttons to direct control channel output in any case.

Running mode: push shift button and up in the meantime you will go Auto running

mode and the display will show A___ AUTO led will light. If you push shift and

down you will go DMX mode.DMX led will light.

Select preheat: push shift and preheat button you can select preheat value

(0-30%).this vale is different in Dmx mode and auto mode.

Select the max: out value: push shift and master to select the max. Out in auto mode

and dmx mode.

Fade time set: push shift and fade time button to set up the fade time. (0-10s) set up

the start DMX address: push shift and address to set up the start address and use up or

down to select.

Select auto pattern: push shift and program button then using up or down to select

auto pattern from 1 to 16.

Select auto speed: push shift and speed button then using up or down to select the

auto speed from 1 to 100. (1 step/10s,10steps/1 s)

INPUT