Coldair GPTF500 Kullanım Talimatları Kılavuzu - Sayfa 8

Isıtıcı Coldair GPTF500 için çevrimiçi göz atın veya pdf Kullanım Talimatları Kılavuzu indirin. Coldair GPTF500 12 sayfaları. 107cm multi season heating & cooling tower fan heater

Sayfayı Yazdır

Operating your Appliance

AUTO ECO THERMOSTAT

Pressing the

buttons while in any Heater function or speed will turn on the

Auto Eco™ function.

To set the room at a specific temperature press the

buttons to the desired

temperature. The display will now reflect the Auto Eco™ symbol and the temperature

will be flashing. The Heater is now in Auto Eco™ Mode.

When you reach the temperature at which you want to set the unit, the set

temperature will flash several times and then the display will return to indicate the

current room temperature and will gradually change as the room temperature

changes. NOTE: the temperature display does not indicate the temperature of the

heated air being emitted by the Heater.

Once the room temperature reaches 2 degrees above the set temperature, the Heater

will shut off. The Heater will continue to run for 15 seconds after the element has

turned off.

If the ambient temperature is equal to the SET temperature, the Heater will run in

LOW heat.

If the ambient temperature is less then the SET temperature by more than 3 degrees,

the Heater will run in HIGH heat.

All of this happens automatically with Auto Eco™ Technology.

To deactivate the Auto Eco™ function, turn the Heater off or press the

button.

NOTE: In Auto Eco™, the Heater will display the current room temperature in °

Fahrenheit. Press the

and

buttons at the same time to change the display to °

Celsius.

FAN

Turn the Fan ON by pressing the Fan Power Button

Upon turning the Fan on, the unit will be in High Speed (F4).

Press the Fan Mode Button

for Medium Speed (F3). Press again for Low Speed (F2).

Press a third time for Super Low Speed (F1).

Press a fourth time to return to High Speed (F4).

To turn the Fan OFF, press the Fan Power Button.