Canon EOS 5D Mark III Kullanım Kılavuzu - Sayfa 25

Yazılım Canon EOS 5D Mark III için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Canon EOS 5D Mark III 41 sayfaları. Eos digital slr camera
Ayrıca Canon EOS 5D Mark III için: Kurulum Kılavuzu (2 sayfalar), Kullanım Kılavuzu (28 sayfalar), Yazılım Kılavuzu (2 sayfalar), Yazılım Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Ürün Kılavuzu (39 sayfalar), Ürün Kılavuzu (36 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Broşür (39 sayfalar), Broşür (32 sayfalar), İşlev Kılavuzu (21 sayfalar), El Kitabı (24 sayfalar), Kullanıcı Kılavuzu (20 sayfalar)

Sayfayı Yazdır

1. Eos 20D

Printing Images

Images can be automatically adjusted and printed within the print range.

Select an image and then select [File] menu

Select a printer to be used and then click the [Print] button.

Printing begins.

Selecting [File] menu

[Page setup] allows you to specify paper sizes.

You can set a printer profile to be used for printing. You can select a rendering intent

(matching method) when you have set the profile (p.1-21).

If you have set CMYK simulation profile (p.1-21), the image is printed in a tone

corresponding to the specified [CMYK simulation profile].

Printing with Easy-PhotoPrint

Easy-PhotoPrint is printing software dedicated for Canon BJ printers.

If Easy-PhotoPrint 2.1 or later has been installed in your computer, you can print images with

Easy-PhotoPrint.

Select an image and then select [File] menu

PhotoPrint].

Easy-PhotoPrint starts up.

Follow the instructions displayed on the Easy-PhotoPrint window to print images.

To print images with Easy-PhotoPrint, you need Easy-PhotoPrint 2.1 or later and a

Canon BJ printer that supports Easy-PhotoPrint 2.1 or later.

The specified output resolution (p.1-20) and trimming (p.1-10) are not supported.

The setting of CMYK simulation (p.1-21) is not supported.

You can set a rendering intent (matching method) when printing (p.1-21).

Displaying Images in EOS Capture

Digital Photo Professional version 2.0 is compatible with EOS Capture version 1.1 or later.

If you have EOS Capture version 1.1 or later installed on your computer, Digital Photo

Professional displays the images shot with EOS Capture.

[Print].

Connect the camera to your computer and set the camera's power

switch to <ON>.

When [CameraWindow] and other windows are displayed, close all the displayed

windows.

Select [Tools] menu

EOS Capture starts up.

Take a shot.

Click the [Shoot] button in EOS Capture or press the shutter button on the camera to

take a shot.

The shot image is displayed in the Digital Photo Professional main window.

When EOS Capture starts up, you can switch the Digital Photo Professional window

automatically from the main window to the edit image window (p.1-20).

[Print with Easy-

[Start EOS Capture].

Cover/Table of

Contents

Introduction

Displaying Thumbnail Images

and Performing Basic Edits

in the Main Window

Performing Detailed

Edits in the Edit

Window

Performing Detailed

Edits in the Edit

Image Window

Displaying an

Image in the Quick

Check Window

Reference

Index

1-19