Dorel Juvenile Group Dream Ride SE Kullanım Kılavuzu - Sayfa 13
Araba Koltuğu Dorel Juvenile Group Dream Ride SE için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Dorel Juvenile Group Dream Ride SE 18 sayfaları. Infant car bed
Sayfayı Yazdır
4358-3137C Dream Ride
2/10/06
1
Latch plate
2
Buckle
Twist vehicle seat belt and
latch plate (or buckle)
If the lap belt continues to loosen, the child restraint
must be moved to another location in the vehicle. A
locking clip will not correct this problem; see your
vehicle owner's manual.
WARNING
!
Failure to check and adjust the manual belt
as described above can result in serious
injury or death.
9:33 AM
Page 25
Manual Belts
Manual lap can allow the
child restraint to loosen
when it is tilted or jarred.
After tightening the lap belt
securely, tilt and push the
child restraint forward and
to both sides. If no
loosening occurs, your
child restraint should be
secure.
If loosening does occur, try
the following: If the buckle
plate slides on the belt,
turn the buckle plate over.
If the buckle slides, turn the
buckle. Refasten the vehicle
lap belt.The release button
should face
out
after
twisting so that it is easy to
reach in an emergency.
22
Locking Clip
NOTE:
Remove the locking clip when the seat belt is
not being used with a child restraint. The locking clip is
located on the back of the
seat.A locking clip will not fix
all types of seat belt problems.
Before you put your child restraint in the vehicle, buckle
the lap/shoulder belt. Pull on the lap belt portion. If it
loosens or slips, you must either use a locking clip to
hold the seat belt tight or move the child restraint to
another seating location.
1
2
23
Thread both vehicle lap
and shoulder belts through
the belt path. Make sure
shoulder belt follows lap
belt path. Buckle. Pull up
on shoulder belt until all
slack is out and lap belt is
tight.
Grasp both vehicle belts
together just behind the
buckle plate and unbuckle.
continued on next page.