Cole & Bright Security 63729 Manuel - Sayfa 4

Taşkın Işık Cole & Bright Security 63729 için çevrimiçi göz atın veya pdf Manuel indirin. Cole & Bright Security 63729 8 sayfaları. Solar powered and linkable maxima security light

Sayfayı Yazdır

LINKING YOUR RADAR 360˚ LIGHTS FOR THE FIRST TIME

Only TWO (2) Lights (con't)

4. On the Master light move the switch located in

between the two lights to "M" position.

5. On the Secondary Light move the switch on the

base to "S" position (right).

6. Press the LINK button located on back of the light

of both units simultaneously until the lights begin to

ﬂ ash. The lights will now start pairing mode. Once

the light on the Secondary unit stops ﬂ ashing and

becomes a steady white light, the pairing of the 2

lights has been successful. The Master unit will still

be slowly ﬂ ashing.

7. Turn the Secondary unit to OFF position. The light

should turn off.

8. Turn the Master unit to OFF position.

The light should turn off.

Your lights are now linked. When the linking process is

completed, the Radar360˚ Linkable lights create a chain of

lights so that each light is set off by its nearest linked light.

9. Now turn the switch on the Secondary light to "S"

position and Master light to "M" position to begin

normal operation. Remember "M" = Master.

IMPORTANT – IDENTIFY YOUR MASTER LIGHT SO IT CAN BE EASILY

LOCATED IN THE FUTURE. It will be needed when adding new Radar 360˚

lights to the network in the future. Switch should be set to "M" (for Master)

position. We also suggest also tieing something bright or easy to see to the

neck between the panel & light.

10. If the link is not working as expected, simply reset your lights to factory

setting by following the "Unlinking your Radar 360˚ Light" Instructions

and then start again.

OFF