Repeats bracketing during continuous shooting
P.Fn-07
While you hold down the shutter button, bracketing repeats continuously in the currently
selected drive mode.
This function is useful when you want to continuously repeat the bracketing sequence.
Sets the number of shots to be bracketed
P.Fn-08
Select the number of shots from the list box.
The usual 3-shot bracketing is changed to 2-, 3-, 5-, or 7-shot bracketing.
In bracketing shots, if you select 5-shot bracketing with 1-stop increment, the bracketing for
the shots is –2, –1, 0, +1 and +2.
This function is useful for adjusting the range of bracketing.
Even when the setting is outside the bracketing level display range, the exposure is
compensated as specified.
This function can be used in combination with C.Fn-09-2/3 and P.Fn-09.
Changes the bracketing sequence for C.Fn-09-2/3 to increased
P.Fn-09
exposure, standard exposure, and decreased exposure
The bracketing sequence when C.Fn-09-2/3 is selected (decreased exposure
exposure
increased exposure) changes to increased exposure
decreased exposure.
This function is useful when you want to start the bracketing sequence with a increased
exposure.
This function can be used in combination with P.Fn-08.
Retains the shift amount for program shift
P.Fn-10
Normally, any program shift amount is canceled after you take the picture. This Personal
Function retains the program shift amount.
This function is useful when you want to shift the standard program line so that priority is
given to the shutter speed or to the aperture.
By shifting the program, you can change the shutter speed or aperture and still retain the same
exposure level. Under the same brightness, you can shift the program line toward the right to
set a faster shutter speed and a larger aperture (lower f/number). Or you can shift the program
line toward the left to set a slower shutter speed and a smaller aperture (higher f/number).
P.Fn-10 retains the amount of program shift. Select the appropriate amount of shift for the level
of priority you want to give to the shutter speed or aperture setting.
5
6
4
3
2
1
standard
0
standard exposure
-1
-2
-3
-4
-5
30
15
The program shift amount remains in effect until you set it back to the standard program
manually or replace the battery or press the <CLEAR> button.
The shift amount is retained even after you change the lens.
Executes AI Servo AF continuous shooting giving priority to
P.Fn-13
the drive speed
This function is compatible with the EOS-1D only.
During continuous shooting, shutter release-priority takes effect instead of focus-priority.
Effective when it is more important to capture an image even though it might be slightly out
of focus.
Darker
Brightness (EV at ISO100)
Brighter
7
8
9
10
11
12
13
14
15
16
17
8
4
2
1
2
4
8
15
30
60
125
Standard program line
Program line shifted toward a faster shutter speed.
Program line shifted toward a slower shutter speed.
With EF50mm f/1.4 USM
Cover/Table of
Contents
Introduction
Downloading Images
from the Camera
Aperture
18
19
20
21
22
23
32
Setting the Cameras
22
other than the EOS-1D
16
Series Cameras
11
8
5.6
Setting the EOS-1D
4
Series Cameras
2.8
2
1.4
1.0
Remote Shooting
250
500
1000
2000
4000
8000
Shutter Speed
Troubleshooting
3-11
1
2
3
4
Index
Sayfayı Yazdır