Canon Pixma Pro9500 Series Manuel - Sayfa 21

Yazılım Canon Pixma Pro9500 Series için çevrimiçi göz atın veya pdf Manuel indirin. Canon Pixma Pro9500 Series 31 sayfaları. Printing on the fine art metal series
Ayrıca Canon Pixma Pro9500 Series için: Kurulum Talimatları (2 sayfalar), Kurulum Talimatları (2 sayfalar), Tamamlayıcı Kılavuz (6 sayfalar), Teknik Özellikler (2 sayfalar), Manuel (25 sayfalar), Hızlı Başlangıç Kılavuzu (20 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (3 sayfalar)

Margin Setting Method 2

Set Print Size function of [Print Size]

Easy-PhotoPrint Pro

Margins can be set to any height and width of the photograph size to print. This

B/W Print with Margins

setting fixes the photograph's vertical and horizontal ratios. Apply this feature

when you want to maintain the original composition of your photograph.

[Example of application to A3 size paper (420 mm x 297 mm)]

1. Use Layout to select [Bordered (full)], then click on the [Specify Print Size]

button to call up the setting screen.

Specify Print Size Button

Bordered (full)

2. To set the right and left margins on the short edges to 45

mm/1.77 inch, set the width to 330 mm (420 mm - 45 mm x

2). The photograph's vertical and horizontal ratios are

fixed, so the ratio to the height is automatically maintained

even when you only change the width direction. Note that

margins can also be larger than 45 mm. The Preview

screen allows you to check the final balance between the

margin and photograph. This further aids in the degree of

freedom and ease of use of this feature.

3. Click on [Center Image] to automatically move the image to the paper center. To

increase the amount of margin at the bottom of the photograph to include the

name of the photograph or the shooting information, simply reduce the [Top] value.

Layout when Center

Image is applied

Example of increasing the bottom margin to insert

shooting information