Air Hogs Zipper Kullanım Kılavuzu - Sayfa 3
Motorlu Oyuncak Araba Air Hogs Zipper için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Air Hogs Zipper 4 sayfaları.
Sayfayı Yazdır1. Set the band on the controller/charger to the same as the Zipper™.(pic.7)
2. Set the ON/OFF switch on Zipper™ to "ON", the power indicator will flash.
IMPORTANT: BE SURE THE CONTROLLER/CHARGER IS "OFF" when turning on the Zipper™.
3. Place the Zipper™ on the ground or hold in your hands.
4. Gently press the throttle trigger to raise your Zipper™ about 1.5 to 3 feet high.
5. When the Zipper™ flies steadily, you can slowly increase the throttle trigger to make Zipper™ fly higher, or release the
throttle trigger a bit to make Zipper™ fly lower. Only small amounts of trigger position change are required for smooth
flying. (pic.8 & pic.9)
6. When you are flying the Zipper™, press the "LIGHT" button on the controller/charger to change the light pattern flashing
on the Zipper™. (pic.10)
ch. A
Hover down
Choose the place which meets the following condition:
1. An indoor environment with a calm air-conditioner. Beware of the air circulation from the air-conditioner or windows.
2. Safety area: It is highly recommended that there is no electric fan, air-conditioner, reading lamp or other dangerous
objects around while flying.
Tip!
OPERATION
- If you crash your Zipper™ you need to switch the ON/OFF button to "ON" again to restart the Zipper™.
- Don't operate the Zipper™ under direct bright light or it will affect the control system of your Zipper™.
- Don't cover the lens of the controller/charger as it will block the IR signal.
- Don't stick any other label onto the Zipper™ as it will affect the receiving of the IR signal.
Tip!
CONTROLLING
- For controlling the throttle trigger on the controller/charger, try not to press the trigger immediately to the
extreme position. It should be like steering a bicycle rather than pressing computer game sticks.
Tip!
SAFETY
- Read the instruction manual before playing with your Zipper™.
- This product is designed to be used only indoors.
- Fly the Zipper™ only in open areas and keep clear of obstacles.
- Make sure you and other people keep 3-6 feet away from the Zipper™ while flying.
- Always keep your Zipper™ in view to prevent it from landing or crashing near your head, your body or
on other people.
- Never disassemble or attempt to modify the product. It may cause damage to the product.
- Never put your hands or face close to rotating parts as you take the risk of injury. Operate this product in a
standing position which will allow you to quickly get out of the way if necessary.
- Always place the Zipper™ and the controller/charger in the "OFF" position when not flying.
- Never allow young children to use this product without adult supervision.
- Never use parts that are damaged or have altered their shape in this product to ensure safe operation.
HOW TO FLY YOUR ZIPPER™
A B C
A B C
CHG OFF ON
LIGHT
pic.7
pic.7
A B C
CHG OFF ON
LIGHT
pic.9
WERE TO FLY YOUR ZIPPER™
Hover up
TIP:
Press the "LIGHT" button to change the light
pattern flashing on the Zipper™.
A B C
CHG OFF ON
LIGHT
pic.8
A B C
CHG OFF ON
LIGHT
pic.10