Daekyung Black Bear DS Series Kullanıcı Kılavuzu - Sayfa 13
Zincirli Vinçler Daekyung Black Bear DS Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Daekyung Black Bear DS Series 18 sayfaları. Chain block
Sayfayı Yazdır
7. Maintenance
7.1 Initial Inspection
1) Change the lubricating grease in the gear box after first 500 hours of use. After 1
every 6 months and refill if necessary.
2) Do not install/operate hoist/trolley in humid environments/working areas.
3) Cover the entire hoist/trolley equipment when used/kept outside.
4) To inform other personnel in the working area, place a <DO NOT OPERATE> or <INSPECTION> sign
when hoist/trolley is under inspection.
7.2 Periodic Inspection and Adjustment
7.2.1 Daily Inspection
Check for following details before use (without any load suspended):
- Is there any unusual or excessive noise from the hoist?
- Is the Safety Latch of the bottom hook (of hoist) properly installed?
- Is the Load Chain lubricated with oil?
Black Bear is a registered trademark of Daekyung Co., Ltd.
1521-6 Dadae-dong, Saha-gu, Busan, Korea
BLACK BEAR HOIST
- 13 -
Tel: +82)51-264-6611 Fax: +82)51-264-6615
inspection, check
st