Asus 90MB0YQ0-M0EAY0 Manuel - Sayfa 10

Anakart Asus 90MB0YQ0-M0EAY0 için çevrimiçi göz atın veya pdf Manuel indirin. Asus 90MB0YQ0-M0EAY0 28 sayfaları.

CPU and chassis fan connectors (4-pin CPU_FAN, 4-pin CHA_FAN1/2)

Connect the fan cables to the fan connectors on the motherboard, ensuring that the

black wire of each cable matches the ground pin of the connector.

Do not forget to connect the fan cables to the fan connectors. Insufficient air flow inside

the system may damage the motherboard components. These are not jumpers! Do not

place jumper caps on the fan connectors! The CPU_FAN connector supports a CPU fan

of maximum 1A (12 W) fan power.

ATX power connectors (24-pin EATXPWR, 8-pin EATX12V)

These connectors are for ATX power supply plugs. The power supply plugs are

designed to fit these connectors in only one orientation. Find the proper orientation

and push down firmly until the connectors completely fit.

•

AMD AM4 CPU socket

The motherboard comes with an AMD AM4 socket designed for AMD Ryzen™

Generation/ Ryzen™ with Radeon™ Vega Graphics/ Ryzen™ 1

processors.

For more details, refer to Central Processing Unit (CPU).

Aura RGB Strip header (4-pin RGB_HEADER)

This header is for RGB LED strips.

The RGB header supports 5050 RGB

multi‑color LED strips (12V/G/R/B), with a

maximum power rating of 3A (12V), and no

longer than 3m.

Before you install or remove any

component, ensure that the ATX power

supply is switched off or the power cord is detached from the power supply. Failure to do

so may cause severe damage to the motherboard, peripherals, or components.

1-2

We recommend that you use an ATX 12V Specification 2.0‑compliant power

supply unit (PSU) with a minimum of 350W power rating. This PSU type has 24‑pin

and 8-pin power plugs.

DO NOT forget to connect the 8‑pin EATX +12V power plug. Otherwise, the

system will not boot up.

We recommend that you use a PSU with higher power output when configuring a

system with more power‑consuming devices or when you intend to install additional

devices. The system may become unstable or may not boot up if the power is

inadequate.

If you are uncertain about the minimum power supply requirement for your system,

refer to the Recommended Power Supply Wattage Calculator at http://support.

asus.com.cn/PowerSupply.aspx?SLanguage=en for details.

RGB_HEADER

PIN 1

+12V G R B

1 2 V

Chapter 1: Product introduction

Generation