Asus A68HM Series Kullanıcı Kılavuzu - Sayfa 23

Anakart Asus A68HM Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Asus A68HM Series 47 sayfaları.

Serial ATA 6.0 Gb/s connectors (7-pin SATA6G 1~4)

These connectors are for the Serial ATA 6.0 Gb/s signal cables for Serial ATA hard

disk drives and optical disc drives. If you installed Serial ATA hard disk drives, you can

create a RAID 0, RAID 1, or RAID 10 configuration through the onboard controller.

A68HM-E SATA 6.0Gb/s connectors

Digital audio connector (4-1 pin SPDIF_OUT)

This connector is for an additional Sony/Philips Digital Interface (S/PDIF) port.

A68HM-E Digital audio connector

ASUS A68HM Series

E9808_A68HM Series_Manual.indb 15

A68HM-E

•

These connectors are set to AHCI mode by default. If you intend to create a Serial ATA

RAID set using these connectors, set the type of the SATA connectors in the BIOS to

[RAID].

•

You must install Windows

ATA hard disk drives. The Serial ATA RAID feature is available only if you are using

Windows

XP SP3 or later version.

•

When using hot-plug and NCQ, set the type of the SATA connectors in the BIOS to

[AHCI].

A68HM-E

SPDIF_OUT

The S/PDIF module is purchased separately.

SATA6G_4

GND

RSATA_TXP4

RSATA_TXN4

GND

RSATA_RXN4

RSATA_RXP4

GND

SATA6G_1

SATA6G_2

SATA6G_3

XP Service Pack 3 or later version before using Serial

1-15

2014/10/16 10:09:04