Asus A7V600 Teknik Güncelleme

Anakart Asus A7V600 için çevrimiçi göz atın veya pdf Teknik Güncelleme indirin. Asus A7V600 1 sayfaları. 3.4.2 entering via tech raid bios utility

Sayfayı Yazdır

A7V600 Technical Updates

3.4.2 Entering VIA

1. Boot-up your computer.

2. During POST, press <Del> to enter the BIOS setup utility.

3. From the BIOS setup, select Advanced -> PCI Configuration ->

Onboard ATA Device First. See page 2-22.

4. Set the Onboard ATA Device First field to [Yes]. Save settings and

exit.

5. During POST, press <Tab> to enter VIA RAID configuration utility.

The following menu options will appear.

The RAID BIOS information on the setup screen shown is for reference only.

What you see on your screen may not be exactly the same as shown.

Create Array

Delete Array

Create/Delete Spare

Select Boot Array

Serial Number View

Channel

Serial_Ch0 Master

Serial_Ch1 Master

On the upper-right side of the screen is the message and legend box. The keys on

the legend box allows you to navigate through the setup menu options. The

message describes the function of each menu item. The following lists the keys

found in the legend box with their corresponding functions.

View Array/Disk Status

Move to the next item

Enter :

Confirm the selection

ESC :

Exit

ASUS A7V600 Technical Updates

Tech RAID BIOS Utility

VIA Tech. RAID BIOS Ver 1.XX

Create a RAID array with

the hard disk attached to

VIA IDE controller

Enter: Confirme the selection

ESC

Drive Name

Array Name

XXXXXXXXXX

(page 3-9)

: View Array/Disk Status

: Move to next item

: Exit

Mode

Size(GB)

Status

xxxxx

xxx.xx

Hdd

xxxxx

xxx.xx

Hdd

IE1372