Asus A8V Deluxe Hızlı Kurulum Kılavuzu - Sayfa 8
Anakart Asus A8V Deluxe için çevrimiçi göz atın veya pdf Hızlı Kurulum Kılavuzu indirin. Asus A8V Deluxe 10 sayfaları. K8 series quick setup guide
Ayrıca Asus A8V Deluxe için: Güncelleme Kılavuzu (2 sayfalar)
Connect the power supply cables
8
The plugs from an ATX power supply are designed to fit the power connectors on the motherboard.
1. Orient the 20-pin power plug such that the plastic clip on the side matches the plastic tab on motherboard power
connector. The plug is in place when the clip snaps over the tab.
2. Follow step 1 to connect the 4-pin ATX 12V power plug.
IMPORTANT!
Make sure that your ATX 12V power supply can provide 8A on the +12V lead and at least 1A on the +5-volt standby lead
(+5VSB). The minimum recommended wattage is 350W. The system may become unstable or may not boot up if the power is
inadequate.
20-pin connector
4-pin connector
8