Asus B250 MINING EXPERT Manuel - Sayfa 19
Anakart Asus B250 MINING EXPERT için çevrimiçi göz atın veya pdf Manuel indirin. Asus B250 MINING EXPERT 29 sayfaları.
Sayfayı Yazdır
Changing the mining mode in BIOS
To change the mining mode in BIOS:
1.
Press <Delete> or <F2> during POST to enter BIOS Setup.
Go to the Advanced menu > Mining Mode. This item is set to [Enabled] by default.
2.
You can change this item by yourself.
Viewing the mining card status
To view the mining card status in BIOS:
1.
Press <Delete> or <F2> during POST to enter BIOS Setup.
Go to the Advanced menu > On Board Slot States, then press <Enter> to display the
2.
status of the expansion cards.
Chapter 1: Product introduction
1-12