daewon DIB-B850R Kullanıcı Kılavuzu - Sayfa 8

Banyo Armatürleri daewon DIB-B850R için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. daewon DIB-B850R 19 sayfaları.

Before installation

Caution

Do not plug the product in until the unit is completely installed.

Read the manual first before installation.

Check whether the toilet to be installed is suitable for the installation

Toilet size, mounting hole spread, shutoff valve installed, Space for T-valve, flexible hose

installed, etc. For this, contact the local dealer where you purchase your bidet seat for

special assistance.

Prepare the standard screwdriver and wrench in advance.

Teflon tape may be needed between plumbing connections

Every product is tested with pure water during production to ensure the highest quality

and performance. It is normal to find a small amount of residual water drops or moisture

on the product.

1. Remove the seat from the existing toilet

Release the nuts and then remove the seat and cover.

Keep the removed seat, cover and nuts in a a proper

place in case of using them again.

2. Shut the supply off, and empty the tank completely

Connect with the cold water supply only.

Failure to do may result in flooding, leaking or damage

to the product when the hose is disconnected.

3. Disconnect the toilet hose and install the T-valve

You may use the bucket to catch the residual water

from the hose.

Check and ensure the rubber washer sits flat inside of

the T-valve.

4. Install the catch plate

Wet the rubber anchor bolts with water and firmly

insert them all the way down into the mounting holes

on the top of the toilet.

Place the mounting plate over the rubber anchor bolts

on the toilet.

Place the brackets flat side down on the mounting

plate over the rubber anchor bolts. Insert metal

mounting bolts through the holders and rubber anchor

bolts; use a screwdriver to screw in the mounting bolts

and tighten.

If the toilet bowl is not suitable to use mounting

anchor bolts, contact the local dealer where you

bought your product for more assistance.

5. Insert the deodorizer filter ※ Applicable models only

Insert the deodorizer filter into the cartridge hole.