DORIC Omnetics PZN-12 Kullanıcı Kılavuzu - Sayfa 7

Aydınlatma Ekipmanları DORIC Omnetics PZN-12 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. DORIC Omnetics PZN-12 11 sayfaları. Fiber-optic & electric rotary joint

Sayfayı Yazdır

2.2 Connectors

The Fiber-optic & Electrical Rotary Joint has two different types of connectors, optical and electrical. There are two

connectors for each type, requiring a signal cable/patch cord (connecting to a console, computer or other signaling de-

vice) and a subject cable/patch cord (connecting to the experimental subject or device).

2.2.1 Electrical Cables

Ensure that the electrical connectors are free of dust using an air duster before installing the cables. When not in use,

install plastic caps on connectors for protection and cleanliness.

• Connect the signal electrical cable to the ﬁxed electrical connector (Fig. 2.4a).

• Connect the subject electrical cable to the rotary connector (Fig. 2.4a).

• The subject electrical cable can be looped into the Clamp (Fig. 2.3b) to provide extra torque. The cable is secured

using a #4-40 nylon socket-head cap screw.

Chapter 2. Operations Guide

(a) Electrical Connectors

Figure 2.4: Rotary Joint Connectors

(b) Optical Connectors