Canon S 530D Servis Kılavuzu - Sayfa 13

Yazılım Canon S 530D için çevrimiçi göz atın veya pdf Servis Kılavuzu indirin. Canon S 530D 45 sayfaları. Canon bjc-s530d: setup instruction
Ayrıca Canon S 530D için: Broşür ve Teknik Özellikler (2 sayfalar), Buradan başlayın (2 sayfalar)

Sayfayı Yazdır

5. Direct Printing Differences from S830D

Item

Order of image printing

Date printing

Index printing

Number of print sheets

Print head alignment

Digital camera direct

printing

Storage function

Trimming function

Viewer display

- Photo numbers are assigned in the order in which each photo was taken by a normal digital

camera.

- In a folder, a higher priority is placed on a file when the file name, not counting the file

extension, consists of 8 characters with the latter 4 being numeric, in compliance with the

DCF (Design rule for Camera File system). Files are sorted in ascending order of those 4

numeric figures.

- In printing of full screen without frame, the data is printed at the bottom right corner over the

image, regardless of print image size. (The date printing position moves relative to the

image.)

- In Index Printing, photo numbers are located almost at the center below each index image.

However, when DPOF Printing is selected, photo numbers and dates are located at the left

below each index image, in the same way with the S830D.

- Up to 9999 is displayed. If the number of sheets exceeds 9999, 9999 remains displayed.

- In direct printing from a memory card, the remaining number of sheets to be printed is

displayed. (If the remaining number of sheets to be printed exceeds 9999, 9999 is

displayed.)

- In Maintenance 4 (from the operation panel), the number of patterns to be checked is 7, and

the specifiable pattern numbers are from 4-01 to 4-07 accordingly, which differs from the

S830D.

- At print instruction from a digital camera, the POWER lamp starts flashing immediately. (If

the automatic print head cleaning is necessary, the cleaning starts immediately.)

- During Direct Printing from a digital camera, if printing is cancelled by pressing the Reset

button, all printing is cancelled, regardless of the number of copies settings.

However, if "Both (Index and Standard)" is selected for Print Type, and the Reset button is

pressed during Index Printing, only the Index Printing is cancelled, and Standard Printing is

performed.

- Exclusive controls when the storage function is set to the writable mode slightly differ from

those of the S830D.

- For several seconds after the storage function is set as a removable drive, direct access to

the memory card is prohibited due to the Photo Direct function. (During the period when

access is prohibited, the Print button lamp turns off once.)

- The exclusive control duration is 5 seconds, while that duration of the S830D is 3 seconds.

- During digital camera Direct Printing, writing is temporarily prohibited.

- New function, usable when optional Image Viewer is activated.

- Trimming is enabled when the mode is set to "Print All (all frames printing)," "Print One

(single frame printing)," or "Print Selected (specified frame printing)," and in borderless

printing.

- During Direct Printing from a memory card, the printer icon is displayed at the lower right

corner of the screen.

- In selecting an image with a cursor button, the hourglass icon may appear in some

instances.

Differences