Asus EX-H410M-V3 Manuel - Sayfa 10

Anakart Asus EX-H410M-V3 için çevrimiçi göz atın veya pdf Manuel indirin. Asus EX-H410M-V3 30 sayfaları.

Sayfayı Yazdır

1.2.1 Layout contents

1. CPU socket

The motherboard comes with a surface mount Intel

Intel

Core

, Pentium

•

2. DDR4 DIMM slots

The motherboard comes with Dual Inline Memory Modules (DIMM) slots designed for DDR4

(Double Data Rate 4) memory modules.

For more details, refer to System memory.

3. Expansion slots

This motherboard supports one PCIe 3.0 x16 graphics card and one PCIe 3.0 x1 network

card, SCSI card or other card that comply with the PCI Express specifications.

4. Fan headers

The Fan headers allow you to connect fans or pumps to cool the

system.

5. Power connectors

These Power connectors allow you to connect your motherboard to a power supply. The

power supply plugs are designed to fit in only one orientation. Find the proper orientation and

push down firmly until the power supply plugs are fully inserted.

Ensure to connect the 4-pin power plug.

•

6. SATA 6Gb/s ports

The SATA 6Gb/s ports allow you to connect SATA devices such as optical disc drives and

hard disk drives via a SATA cable.

7. USB 3.2 Gen 1 header

The USB 3.2 Gen 1 header allows you to connect a USB 3.2 Gen

1 module for additional USB 3.2 Gen 1 ports. The USB 3.2 Gen 1

header provides data transfer speeds of up to 5 Gb/s.

The USB 3.2 Gen 1 module is purchased separately.

1-2

Gold and Celeron

Supports up to Intel

65W CPU.

For more details, refer to Central Processing Unit (CPU).

For a fully configured system, we recommend that you use a power supply unit

(PSU) that complies with ATX 12V Specification 2.0 (or later version) and provides a

minimum power of 350 W.

We recommend that you use a PSU with a higher power output when configuring a

system with more power-consuming devices. The system may become unstable or

may not boot up if the power is inadequate.

If you are uncertain about the minimum power supply requirement for your system, we

recommend you to refer to online resources for Power Supply Wattage Calculator.

Socket LGA1200 designed for 10

Processors.

Chapter 1: Product introduction

Gen

FAN PWM

FAN IN

FAN PWR

GND

PIN 1

USB3+5V

IntA_P1_SSRX-

IntA_P2_SSRX-

IntA_P1_SSRX+

IntA_P2_SSRX+

GND

IntA_P1_SSTX-

IntA_P2_SSTX-

IntA_P1_SSTX+

IntA_P2_SSTX+

GND

IntA_P1_D-

IntA_P2_D-

IntA_P1_D+

IntA_P2_D+

GND