BOLEX H Declic Kullanım Kılavuzu - Sayfa 5

Kamera Aksesuarları BOLEX H Declic için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. BOLEX H Declic 6 sayfaları. Hand grip

First, screw the end of the connecting

cable into the threaded hole in the pre-

selection device on the lens.

Then screw the other end into the hand

grip (fig. 5), keeping a finger on the

release. The length of the cable is cor-

rectly adjusted when there is absolutely

no play and when the slightest pressure

on the hand grip trigger moves the pre-

selection plunger of the lens.

To check that the pre-selection device is

functioning properly, fully depress the

trigger and make sure the diaphragm of

the lens closes to its correct setting at

the moment the camera starts

Lock the connecting cable by tightening

up the screw(s), (fig. 5).

N. B.

If the cable is correctly adjusted, it will be

0_--..:._.

impossible to engage the camera conti-

nuous running position from the hand grip,

even if the lever (I) is turned forward. This

is quite normal. The Vario-Switar 36 and 86

are constructed in such a way that the move-

ment of the control cable of the diaphragm

pre-selection is limited. Don't use

force.

Simply turn the lever (I)

backwards.

For Vario-Switar 36 EE or 86 EE zoom

lenses

Proceed as descri bed above for the Vario-

Switar 36 or 86. The cable is correctly ad-

justed when there is roughly 1 mm play

between the movement of the hand grip

release and that of the pre-selection plunger

in the lens.

Check the correct functioning

Fig