Canon Viewer for Pocket PC RV-P1.0 Kullanıcı Kılavuzu - Sayfa 11
Yazılım Canon Viewer for Pocket PC RV-P1.0 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Canon Viewer for Pocket PC RV-P1.0 22 sayfaları.
Sayfayı Yazdır
5-2. Operating the Camera
5-2-1. Obtaining Camera Control Privileges
Although more than a client can connect to the same camera server, the client who can
control the camera is limited to only the client currently holding control privileges.
Camera control privileges can be obtained by the following methods.
Normal Mode
Tap the Start Control button.
The display changes depending on the camera control status.
Status that you can obtain control privileges.
Status that you are in a queue for control privileges.
Status that you are currently holding control privileges.
Status that you can hold control privileges beyond the time limit.
Status that you are disconnected from the camera server.
Status that you are not connected to the camera server.
It is not guaranteed that control privileges can be obtained immediately whenever you wish.
Check the camera control status before you try to control the camera.
Note
Control Status panel
(See table below)
Start Control button
(See table below)
Tap the Start Control button to obtain control privileges.
The number displayed next to the sign of person indicates control queue time that you should
wait to obtain control privileges. As there may be some client who may cancel control privileges
or quit from the queue for control privileges while you are waiting for control privileges, there is
a possibility that you can obtain control privileges before control queue time reaches '0'.
The number displayed next to the clock sign indicates the permitted time to hold control
privileges.
When there is no camera control request from other clients, you can keep holding control
privileges beyond the permitted time.
Connection to the camera server is cut off for some reason.
Connection to the camera server is failed or not permitted.
Full Screen Mode
Tap Start Control on the Camera
Control/View Settings menu.
7