Akyga Ultimate Series Kullanıcı Kılavuzu - Sayfa 2

Güç Kaynağı Akyga Ultimate Series için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Akyga Ultimate Series 3 sayfaları. Atx power supplies

ATX power supplies - user manual

Safety Precautions

The assembly should be carried out by persons with appropriate technical knowledge of PC

construction.

Connecting components whose demanded power is greather than power of the power supply, can

cause battery failure or even damage (burn) of power supply.

An electrostatic discharge occurs when two object touch each other, for example, an electric

charge that occurs when user touch metal door handle after walking on a carpet . Discharging

electrostatic charges from fingers or other electrostatic conductors can damage electronic

components. To avoid damaging the computer, abstain from touching electrical outlets, wires and

electonic circuits. The user's contact with electronic components should be kept to a minimum.

The manufacturer of the product is not responsible for damage or insults caused in effect

of disobey the safety instructions and informations contained in these user manual.

Keep the product and the packaging out of range of children and animals. The package

includes a foil that child could choke while playing.

It is forbidden to apply the mechanical load to the product - strong shocks, impacts, dropping or

crushing may cause its damage.

The product operation in adverse conditions is not allowed. Adverse conditions are primarily:

exposure to direct sunlight, high or very low ambient temperatures, strong vibrations, high

humidity, surrounds of gases, dusts or flammable and aggressive liquids.

If the product has been damaged, does not work properly or has been stored for a long period

of time in bad or unfavorable conditions, safe operation of the device is not possible. It is

essential to stop using the product and to protect it against re-use for security purposes.

Product and power cord should not be touched with moist or wet hands under no

circumstances.

Short-circuiting the current connection is prohibited.

Make sure that the power cord is not crushed, bent, twisted, rubbed against sharp edges or

mechanically loaded in any other way. Avoid thermal load of the cable - in particular keep away

from heat sources (such as stoves, radiators, fireplaces).

Power cords should be laid in such a way as to eliminate the risk of stumbling or hooking over.

Its forbidden to modify the power cord. In the case of modifications, the cable may be

damaged, causing threats to life, health and property.

Before connecting the adapter to the mains socket, make sure that the voltage specified on the

power supply matches voltage supplied to the household socket.

Mains plug should be disconnect from power socket if the product is not in use for a long time.

When disconnecting the power cord from the socket and from the device, do not pull on the

cord, but only on the part of the cable plug provided for this purpose.

In case of any doubts regarding operation, safety or connection of the product, please contact

the manufacturer or a qualified specialist for this purpose.

All maintenance, adjustment and repair work on the product may only be carried out by a

qualified person in a specialist facility.

p. 2