Canon DC-5384 Kullanıcı Kılavuzu - Sayfa 20

Projektör Canon DC-5384 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Canon DC-5384 40 sayfaları. Canon projector user manual

Basic operation

On the control panel

Power-on

1. Turn on the device connected to the projector first.

2. Plug the AC adapter in both the projector and the wall outlet.

The POWER indicator lights up.

The CHARGE indicator lights up when the projector connects with a not fully

charged battery.

The projector charges a not fully charged battery all the time.

The projector stops charging battery when battery is fulled.

3. Press the POWER button either on the control panel or the remote control.

The LAMP indicator lights up and the POWER indicator goes off.

The message "Searching for source" appears on the screen.

The lamp occasionally fails to light up. Turn off the projector, wait for one minute

and then turn on it again.

After the POWER button is pressed, the image may flicker before the lamp

becomes stable. This is not a product malfunction.

EN-20

Indicator

LAMP(Green)

Condition

Stand-by.

When the

lamp is on.

POWER(Red)

Off