Canon LV 5210 - SVGA LCD Projector Şartname - Sayfa 14
Projektör Canon LV 5210 - SVGA LCD Projector için çevrimiçi göz atın veya pdf Şartname indirin. Canon LV 5210 - SVGA LCD Projector 22 sayfaları. Expand serial command functional specification
Ayrıca Canon LV 5210 - SVGA LCD Projector için: Şartname (47 sayfalar)
Sayfayı Yazdır
Basic Serial Functional Specification for LV-5210/7215/7210
6.31 IMAGE (Toggle) COMMAND
COMMAND
"C27" [CR]
Switch Image setting status.
Detail
This command works the same as the remote control's "Image" button or the
Acceptable
Response
Unacceptable
6.32 ON START SETTING COMMAND
COMMAND
"C28" [CR]
Set to Power ON setting status
Detail
This setting status is stored in EEPROM, even if the power is ON/OFF.
Acceptable
Response
Unacceptable
6.33 ON STARTCANCELLATINO COMMAND
COMMAND
"C29" [CR]
Cancel Power ON Start
Detail
This status is stored in EEPROM even when power is OFF or ON
Acceptable
Response
Unacceptable
6.34 Power Management Ready COMMAND
COMMAND
"C2A" [CR]
Set Power Management to Ready
Detail
This status is stored in EEPROM, so even if turning off and on.
Acceptable
Response
Unacceptable
6.35 Power Management OFF COMMAND
COMMAND
"C2B" [CR]
Set Power Management to OFF mode.
Detail
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
Response
Unacceptable
6.36 Power Management Shut down COMMAND
COMMAND
"C2E" [CR]
Set Power Management to Shut down mode.
Detail
This status is stored in EEPROM, and even if turning OFF and ON.
Acceptable
Response
Unacceptable
key on the projector body.
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
[ACK] [CR]
"?" [CR]
Page
14