Canon LV 5210 - SVGA LCD Projector Şartname - Sayfa 22
Projektör Canon LV 5210 - SVGA LCD Projector için çevrimiçi göz atın veya pdf Şartname indirin. Canon LV 5210 - SVGA LCD Projector 47 sayfaları. Expand serial command functional specification
Ayrıca Canon LV 5210 - SVGA LCD Projector için: Şartname (22 sayfalar)
Sayfayı Yazdır
EXPAND SERIAL COMMAD FUNCTIONAL SPECIFICATION for LV-5210/7215/7210
8.6.2
CF_AVDLINECOMMAND
COMMAND
"CF_AVDLINE_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical resolution value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.3
CF_AVHPOS COMMAND
COMMAND
"CF_AVHPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE horizontal position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.4
CF_AVVPOS COMMAND
COMMAND
"CF_AVVPOS_%1" [CR]
"UP"............Current Setting+1
%1
"DN"............Current Setting-1
Set AV service MODE vertical position value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
Acceptable
Response
Unacceptable
8.6.5
CF_AVSERV COMMAND
COMMAND
"CF_AVSERV_%1" [CR]
%1
"RST"
Set AV horizontal/vertical resolution that is set in such as "CF_A Ｖ
DDOTS"/"CF_AＶＤＬＩＮＥ" to default setting value.
(Only valid when it is in the usual Power ON status.)
Details
The setting value is stored in EEPROM. When ALL OFF the projector, the
value will return to the original setting.
When there is no signal, the projector returns "101" [CR].
"000" [CR]
"101" [CR] ----Input-VIDEO
"000" [CR]
"101" [CR] ----Input S-VIDEO
"000" [CR]
"101" [CR] ----Input-VIDEO
Page
22