Canon LV-5200 Kullanıcı El Kitabı - Sayfa 8
Projektör Canon LV-5200 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Canon LV-5200 48 sayfaları. Canon lv-5200: user guide
Ayrıca Canon LV-5200 için: Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
PREPARATION
This projector uses nominal input voltages of 100-120 V or 200-240
V AC. This projector automatically selects the correct input
voltage. It is designed to work with single-phase power systems
having a grounded neutral conductor. To reduce the risk of electric
shock, do not plug into any other type of power system.
Consult your authorized dealer or service station if you are not sure
of the type of power supply being supplied.
Connect the projector with all peripheral equipment before turning
the projector on. (Refer to pages 11 ~ 13 for connection.)
CAUTION
For safety, unplug the AC Power Cord when the projector is not
in use.
When this projector is connected to the AC outlet with the AC
Power Cord, it is in Stand-by Mode and consumes a little elec-
tric power.
NOTE ON THE POWER CORD
The AC Power Cord must meet the requirements of the country where you use the projector.
Confirm the AC plug type with the chart below. The proper AC power cord must be used.
If the supplied AC Power Cord does not match the AC outlet, contact your sales dealer.
Projector side
INSTALLING THE PROJECTOR IN PROPER POSITION
Install the projector properly. Improper installation may reduce the lamp lifetime and cause fire hazard.
20˚
20˚
NO UPWARD
8
SETTING-UP THE PROJECTOR
CONNECTING AC POWER CORD
For the U.S.A. and Canada
To the POWER CORD
CONNECTOR on the
projector.
Do not tilt the projector more than
20 degrees above and below.
Do not point the projector up to
project an image.
Connect the AC Power Cord (supplied) to the
projector.
The AC outlet must be near this equipment and
must be easily accessible.
AC Outlet side
For Continental Europe
Ground
To the AC Outlet.
(120 V AC)
Do not point the projector down to
project an image.
NO DOWNWARD
Do not put the projector on either
side to project an image.
NO SIDEWAYS
To the AC Outlet.
(200 - 240 V AC)