Canon LV-5220 - Multimedia Projector SVGA İşlevsel Özellikler - Sayfa 8
Projektör Canon LV-5220 - Multimedia Projector SVGA için çevrimiçi göz atın veya pdf İşlevsel Özellikler indirin. Canon LV-5220 - Multimedia Projector SVGA 42 sayfaları. Multimedia projectors
Ayrıca Canon LV-5220 - Multimedia Projector SVGA için: İşlevsel Özellikler (20 sayfalar), Teknik Özellikler (6 sayfalar)
Sayfayı Yazdır
Expand Serial Command Functional Specification
5. Functional Execution Command Table
5.1. Image Command Table
Execute command
CF_BRIGHT_%1 [CR]
CF_CONT_%1 [CR]
CF_COLOR_%1 [CR]
CF_TINT_%1 [CR]
CF_SHARP_%1 [CR]
CF_GAMMA_%1 [CR]
CF_WBAL-R_%1 [CR]
CF_WBAL-G_%1 [CR]
CF_WBAL-B_%1 [CR]
CF_COLTEMP_%1 [CR]
CF_PROGV_%1 [CR]
CF_FILM_%1 [CR]
CF_IMAGE_%1 [CR]
CF_IMAGEADJ_%1 [CR]
5.2. PC Control Command Table
Execute command
CF_FSYNC_%1 [CR]
CF_TDOTS_%1 [CR]
CF_CLAMP_%1 [CR]
CF_H-POS_%1 [CR]
CF_V-POS_%1 [CR]
CF_DDOTS_%1 [CR]
CF_DLINE_%1 [CR]
CF_PCSTORE_%1 [CR]
CF_PCMODEFREE_%1 [CR]
5.3. Video Control Command Table
Execute command
CF_AVDDOTS_%1 [CR]
CF_AVDLINE_%1 [CR]
CF_AVHPOS_%1 [CR]
CF_AVVPOS_%1 [CR]
CF_AVSERV_%1 [CR]
5.4. Input Control Command Table
Execute command
CF_INPUT_%1 [CR]
CF_SOURCE_%1 [CR]
CF_INPUT_%1_%2 [CR]
CF_SYSTEM_%1 [CR]
5.5. Screen Command Table
Execute command
CF_SCREEN_%1 [CR]
CF_FLSCREN_%1 [CR]
CF_TRUE_%1 [CR]
CF_DZCENT_%1 [CR]
CF_KEYSTONE_%1 [CR]
CF_KYSTNMODE_%1 [CR]
Set Brightness value
Set Contrast value
Set Color value
Set Tint value
Set Sharpness value
Set Gamma value
Set White Balance Red value
Set White Balance Green value
Set White Balance Blue value
Set Color Temp. value
Set or Cancel for Progressive
Set or Cancel for Film mode
Set Image mode
Reset and Store for Image adjustment
Set Fine Sync value
Set Total Dots value
Set Clamp value
Set Horizontal Position value
Set Vertical Position value
Set Display Dots value
Set Display Line value
Store current PC Adj. status to Mode1, 2, 3, 4, or 5
Reset Mode1, 2, 3, 4, and 5
Set Horizontal Resolution value
Set Vertical Resolution value
Set Horizontal Position value
Set Vertical Position value
Reset Horizontal / Vertical Resolution that are set in
such as CF_AVDDOTS / CF_AVDLINE to default setting.
Select Input
Select Input Sauce
Select Input and Source
Select System
Select Screen size
Set and Cancel Full Screen
Set and Cancel True for Screen
Cancel Digital Zooms
Set Keystone
Set Keystone Store mode
Page 7 of 41
Item
Item
Item
Item
Item