Canon LV-S2 Kullanıcı El Kitabı - Sayfa 33
Projektör Canon LV-S2 için çevrimiçi göz atın veya pdf Kullanıcı El Kitabı indirin. Canon LV-S2 44 sayfaları. Micro-portable multimedia projector
Ayrıca Canon LV-S2 için: Broşür ve Teknik Özellikler (2 sayfalar)
Sayfayı Yazdır
1
Press the MENU button and the ON-SCREEN MENU will
appear. Press the POINT LEFT/RIGHT button(s) to move the
red frame to the IMAGE ADJUST Menu icon.
2
Press the POINT DOWN button to move the red frame to the
item that you want to adjust and then press the SET button. The
level of each item is displayed. Adjust each level by pressing the
POINT LEFT/RIGHT button(s).
Contrast
Press the POINT LEFT button to decrease contrast, and the POINT
RIGHT button to increase contrast. (From 0 to 63.)
Brightness
Press the POINT LEFT button to adjust image darker, and the
POINT RIGHT button to adjust brighter. (From 0 to 63.)
Color
Press the POINT LEFT button to lighten color, and the POINT
RIGHT button to darker color. (From 0 to 63.)
Tint
Press the POINT LEFT button or the POINT RIGHT button to obtain
the proper color. (From 0 to 63.)
White balance (Red)
Press the POINT LEFT button to lighten the red tone and the POINT
RIGHT button to darker tone. (From 0 to 63.)
White balance (Green)
Press the POINT LEFT button to lighten the green tone and the
POINT RIGHT button to darker tone. (From 0 to 63.)
White balance (Blue)
Press the POINT LEFT button to lighten the blue tone and the
POINT RIGHT button to darker tone. (From 0 to 63.)
Sharpness
Press the POINT LEFT button to soften the image, and the POINT
RIGHT button to sharpen the image. (From 0 to 15.)
Gamma
Press either the POINT LEFT button or the POINT RIGHT button to
obtain a better balance of contrast. (From 0 to 15.)
Auto grayscale
When this function is "ON", it automatically enhances the contrast of
the bright and dark part of image.
Auto fleshtone
When this function is "ON", it produces a more vivid image according
to the image condition.
IMAGE LEVEL ADJUSTMENT
IMAGE ADJUST MENU
Move the red frame to the
item to be selected and then
press the SET button.
Press the POINT LEFT/RIGHT but-
tons to adjust value.
Press the SET button at this icon to
display other items.
Press the SET button at this icon to
display previous items.
Press POINT LEFT/RIGHT buttons
to adjust the value.
Press the SET button at this icon to
store the value.
NOTE : Tint cannot be adjusted when the video
system is PAL, SECAM, PAL-M or PAL-N.
VIDEO INPUT
IMAGE ADJUST
Menu icon
33