Canon REALiS SX80 Mark II D Tamamlayıcı Kılavuz - Sayfa 8

Projektör Canon REALiS SX80 Mark II D için çevrimiçi göz atın veya pdf Tamamlayıcı Kılavuz indirin. Canon REALiS SX80 Mark II D 10 sayfaları. Projector
Ayrıca Canon REALiS SX80 Mark II D için: Ürün Kılavuzu (12 sayfalar), Ürün Kılavuzu (13 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Kullanıcı Kılavuzu (25 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Broşür ve Teknik Özellikler (4 sayfalar), Ürün Kılavuzu (18 sayfalar), Özellikler (19 sayfalar), Kullanıcı Kılavuzu (1 sayfalar), Ürün Kılavuzu (10 sayfalar), Broşür (27 sayfalar), Sıkça Sorulan Sorular (1 sayfalar), Ürün Özellikleri (2 sayfalar), Kullanıcı Kılavuzu (2 sayfalar), Broşür (2 sayfalar), Broşür (32 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Broşür ve Teknik Özellikler (12 sayfalar), Özellikler & Spesifikasyonlar (3 sayfalar)

Sayfayı Yazdır
Canon REALiS SX80 Mark II D Tamamlayıcı Kılavuz

13. Error List

In response to commands, errors are indicated by the following strings.
<CR>, <LF>, <CR>+<LF> or <00> is added at the end of the error string. These delimiters correspond to the command.
Error String
e:0001 BAD_SEQUENCE
65h 3Ah 30h 30h 30h 31h 20h 42h 41h 44h 5Fh 53h 45h 51h 55h 45h 4Eh 43h 45h
e:0002 INVALID_COMMAND
65h 3Ah 30h 30h 30h 32h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 43h 4Fh 4Dh 4Dh 41h 4Eh 44h
e:0004 INVALID_FORMAT
65h 3Ah 30h 30h 30h 34h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 46h 4Fh 52h 4Dh 41h 54h
e:0005 NOT_POWER_SUPPLIED
65h 3Ah 30h 30h 30h 35h 20h 4Eh 4Fh 54h 5Fh 50h 4Fh 57h 45h 52h 5Fh 53h 55h 50h 50h 4Ch 49h 45h 44h
i:BUSY (POWER)<CR>
69h 3Ah 42h 55h 53h 59h 20h 28h 50h 4Fh 57h 45h 52h 29h 0Dh
e:000A INVALID_PARAMETER
65h 3Ah 30h 30h 30h 41h 20h 49h 4Eh 56h 41h 4Ch 49h 44h 5Fh 50h 41h 52h 41h 4Dh 45h 54h 45h 52h
e:000B JOB_TIMEOUT
65h 3Ah 30h 30h 30h 42h 20h 4Ah 4Fh 42h 5Fh 54h 49h 4Dh 45h 4Fh 55h 54h
i:BUSY (FOCUS)
69h 3Ah 42h 55h 53h 59h 20h 28h 46h 4Fh 43h 55h 53h 29h
i:BUSY (ZOOM)
69h 3Ah 42h 55h 53h 59h 20h 28h 5Ah 4Fh 4Fh 4Dh 29h
i:BUSY (LOGO_CAPTURE)
69h 3Ah 42h 55h 53h 59h 20h 28h 4Ch 4Fh 47h 4Fh 5Fh 43h 41h 50h 54h 55h 52h 45h 29h
i:BUSY (IMAGE)
69h 3Ah 42h 55h 53h 59h 20h 28h 49h 41h 4Dh 47h 45h 29h
i:BUSY (NOW_SETTING)
69h 3Ah 42h 55h 53h 59h 20h 28h 4Eh 4Fh 57h 5Fh 53h 45h 54h 54h 49h 4Eh 47h 29h
i:BUSY
69h 3Ah 42h 55h 53h 59h
e:1006 NOW_BLANK
65h 3Ah 31h 30h 30h 36h 20h 4Eh 4Fh 57h 5Fh 42h 4Ch 41h 4Eh 4Bh
e:1009 NOW_FREEZE
65h 3Ah 31h 30h 30h 39h 20h 4Eh 4Fh 57h 5Fh 46h 52h 45h 45h 5Ah 45h
e:100A NOW_D.ZOOM
65h 3Ah 31h 30h 30h 41h 20h 4Eh 4Fh 57h 5Fh 44h 2Eh 5Ah 4Fh 4Fh 4Dh
e:100B NOW_SPECIAL_MENU
65h 3Ah 31h 30h 30h 42h 20h 4Eh 4Fh 57h 5Fh 53h 50h 45h 43h 49h 41h 4Ch 5Fh 4Dh 45h 4Eh 55h
Error Details
Communication sequence error.
Invalid (undefined) command.
Invalid command format.
The projector is off.
The projector is switching power modes.
The parameter (type) is invalid (undefined).
Includes cases when the number of parameters is
incorrect.
Internal processing in the projector has timed out.
The focus lens is being driven.
The zoom lens is being driven.
User image registration in progress.
Image mode switching in progress.
Signal setting (detection) in progress.
Internal processing in the projector in progress.
Cannot execute command. Blank in progress.
Cannot execute command. Freeze in progress.
Cannot execute command. D. zoom in progress.
Cannot execute this command in current menu
mode.
Corrective Action
Wait until a response is received until sending commands.
Send valid commands.
Send commands in the valid format.
Use the "POWER ON" command to turn the projector on.
Wait until the power mode is ON,OFF, or PMM.
Use the correct parameters.
Resend the command.
Wait until the projector is finished driving the focus lens.
Wait until the projector is finished driving the zoom lens.
Wait until user image registration is complete.
Wait until the projector has switched the image mode.
Wait until processing is complete.
Wait until current processing is complete.
Resend the command after blanking operation has been
canceled.
Resend the command after freeze operation has been canceled.
Resend the command after D. zoom operation has been
canceled.
Resend the command after you finish operations in the current
menu mode has been canceled.
PRJ⇒PC