Dorma C300 Kurulum Talimatları - Sayfa 2

Kilitler Dorma C300 için çevrimiçi göz atın veya pdf Kurulum Talimatları indirin. Dorma C300 2 sayfaları. Cylindrical leverset

Sayfayı Yazdır

Installation Instructions

4. Install rose

4.1 Place the rose onto the rose

insert oriented such that the

rose dimples line up with the

rose insert notches, and the rose

notch is towards the bottom of

the rose. (See ﬁ gure for exact

placement).

4.2 Push the rose in place against

the face of the door.

Rose

insert

Dimple

notch

Steps to install new cylinder

1. Remove the outside lever by inserting the key, turn clockwise and

hold at 90°. Using the pick, depress the lever catch through the pick

hole and remove the lever. Remove the key.

Pick

hole

90°

Pick

Lever

catch

76019327 12/14

5. Install inside lever

5.1 Push the inside lever onto the

spindle until it clicks into place.

Inside

lever

Rose notch

2. Remove the lever insert and cylinder

from. Replace with the new cylinder

and reinstall the lever insert.

Cylinder

3. Insert the key in the cylinder.

DO NOT turn the key.

Spindle

Be sure the tailpiece is horizontal.

4. Press the outside lever onto the spindle until the lever contacts the

lever catch.

5. Insert the key into the core, turn clockwise and hold at 90°. Press the

lever fully onto the spindle until it clicks into place. Release the key.

Lever

insert

Lever

catch

6. Install strike

Strike part list

6.1 Insert the strike as

1 - Strike

shown.

3/4

" combo

2 - 8-32 x

6.2 Secure with two

screws (x2)

" combo

8-32 x

screws.

Tailpiece

(horizontal)

90°