Canon WUX500ST Manuel - Sayfa 9

Projektör Canon WUX500ST için çevrimiçi göz atın veya pdf Manuel indirin. Canon WUX500ST 19 sayfaları.

3-2 .HDBaseT specifications

HDBaseT is used to transfer video signal and network data. Below image shows the

connections for HDBaseT; note that the WUX500ST is equipped with a receiver so no extra

receiver is needed.

●For video signals (HDMI cable is used for connection ①)

① Video signal is sent to the transmitter from an output device such as Blu-ray player.

② Transmitter then converts the video signal into HDBaseT signal and sends out.

③ Receiver receives the HDBaseT signal and converts to an HDMI signal and sends out.

④ Display device will display the HDMI signal.

●For network communications (Network cable is used for connection ①)

① Network data is sent to the transmitter from a secured network.

② Transmitter then converts the network data into HDBaseT signal and sends out.

③ Receiver receives the HDBaseT signal and converts to a network data and sends out.

④ Network data from a display device can transmit in the same manner in reverse direction.

WUX500ST (9/18)