CANOPY STAR CNP-50 Series Kurulum Kılavuzu - Sayfa 2
Fener CANOPY STAR CNP-50 Series için çevrimiçi göz atın veya pdf Kurulum Kılavuzu indirin. CANOPY STAR CNP-50 Series 8 sayfaları.
Sayfayı YazdırINSTALLATION INSTRUCTIONS
1.
Using 4" hole saw, cut hole in canopy where fixture is to be mounted. Hole location needs to be centered be-
tween canopy ribs to allow wire harness/cover assembly to fit.
2.
Install mounting plate assembly by folding mounting tabs in, insert mounting plate into 4" hole and secure by
tightening mounting tab screws using #2 Phillips screw driver. See Figures 1 and 2.
4" hole
Mounting tabs
FIG 1
3.
Hang Canopy Fixture on mounting plate assembly by hooking hinge on mounting plate hook. Secure by sliding
locking plate forward into slot and tightening #6-32 locknut. See Figures 3 and 4.
FIG 3
US LED
| 6807 PORTWEST DR | HOUSTON, TX 77024 | T 866 972 9191 | F 713 972 9393 | [email protected] | www.usled.com
INSTALLATION GUIDE
Mounting tab
screws
FIG 2
Locking plate
Locknut
FIG 4
CNPx-50
Page 2
#44-000017
Updated 04.20.18