Akyga AK-CA-24 Kullanıcı Kılavuzu - Sayfa 4

Kontrolör Akyga AK-CA-24 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Akyga AK-CA-24 5 sayfaları.

AK-CA-24 - user manual

8. Fan 2 connector

The 4 / 3-pin hybrid connector is used for connecting the fan.

9. Sensor SYS

The sensor is used to measure the temperature. The current value is displayed on the left side of the

display.

10. CPU sensor

The sensor is used to measure the temperature. The current value is shown on the right side of the

display.

11. USB 3.0 connector

Use this cable with a 19-pin USB connector to connect the USB 3.0 ports to your mainboard or

expansion card.

12. Molex connector

The cable with a Molex connector is used to connect the controller to the power supply.

Controller installation:

p. 4