Cansec CanProx One Kurulum Talimatları Kılavuzu - Sayfa 5
Kart Okuyucu Cansec CanProx One için çevrimiçi göz atın veya pdf Kurulum Talimatları Kılavuzu indirin. Cansec CanProx One 6 sayfaları.
Sayfayı YazdırMullion Mounting
1. The drawing on the right shows the respective
locations of each hole and their specific sizes for
mounting the reader module. Drill these holes
accordingly. For the screw holes, drill an
appropriate pilot hole for the screws you intend to
use.
2. Wire the reader module to the access control panel. Screw the reader module to the mullion.
3. Snap the reader cover on.
MULLION
CanProx One Installation Instructions
CABLE FEED HOLE
7/8"
(22 mm)
SCREW
HOLE
READER
MODULE
SCREW
HOLE
READER
COVER
Page: 5/5
August 2010 Rev 2.6