Bolton Tools BS-128DR Kullanım Kılavuzu - Sayfa 9
Testere Bolton Tools BS-128DR için çevrimiçi göz atın veya pdf Kullanım Kılavuzu indirin. Bolton Tools BS-128DR 16 sayfaları. Horizontal and vertical metal cutting band saw
Sayfayı YazdırD. Tighten the screw #11.
MAINTENANCE
CAUTION: MAKE CERTAIN THAT THE UNIT IS DISCONNECTED FROM THE
POWER SOURCE BEFORE ATTEMTING TO SERVICE OR REMOVE ANY
COMPONENT!
LUBRICATION
Lubricate the following components using SAE-30 oil as noted.
1. Ball-bearing none.
2. Driven pulley bearing 6-8 drops a week.
3. Vise lead screw as needed.
4. The drive gears run in an oil bath and will not required a lubricant
change more often than once a year, unless the lubricant is
accidentally contaminated or a leak occurs because of improper
replacement of the gear box cover. During the first few days of
operation, the worm gear drive will run hot. Unless the temperature
exceeds 200F, there is no cause for alarm.
The following lubricants may be used for the gear box:
Atlantic Refinery Co., Mogul Cyl. Oil
Cities Service Optimus No.6
Gulf Refinery Co Medium Gear Oil
Pure Oil co. Park Clipper
Adjusting the blade