Dormakaba TP/TA EASY Safe Montaj Talimatları - Sayfa 16

İç Mekan Mobilyaları Dormakaba TP/TA EASY Safe için çevrimiçi göz atın veya pdf Montaj Talimatları indirin. Dormakaba TP/TA EASY Safe 20 sayfaları.

dormakaba mounting instructions

4.12 Mounting the end covers

Note

If the new door rail is combined with

UNIVERSAL corner fittings, the black plastic

cap of the end cover must be left out, so

that the gap of 2 mm can be achieved.

Attach the black plastic cap to the end cover

(Fig. 40/1).

Fig. 40

Mounting the end cover

2. Use the screw to secure the entire end cover to

the door rail (Fig. 40/2).

4.12.2 20 mm pivot point

Note

In the case of a 20 mm pivot point, the large

glass bite is covered by the semi-circular end

cover. The end cover is resting on the glass.

Use the screw to secure the end cover to the door

rail. The end cover is resting on the glass.

Fig. 41

Mounting the semi-circular end cover

2. If the end cover is not resting on the glass, then if

necessary align the door rail with the end cover.

TP/TA EASY Safe

Note

In the case of a free glass edge, the large

glass bite of 15 mm is covered with an

adapter piece and an angled end cover. The

end cover is resting on the glass.

Check the glass bite (Fig. 42/1) and re-adjust if

necessary.

Fig. 42

Mounting the adapter piece and end cover

2. Use the screw to screw the adapter piece and the

angled end cover on the door rail (Fig. 42/2).

WN 060028 45532

Mounting

2020-11