Dormakaba LA GARD 5715 Kullanıcı İşletim Talimatları - Sayfa 2
İnterkom sistemi Dormakaba LA GARD 5715 için çevrimiçi göz atın veya pdf Kullanıcı İşletim Talimatları indirin. Dormakaba LA GARD 5715 2 sayfaları. Electronic entry device
Ayrıca Dormakaba LA GARD 5715 için: Kullanıcı İşletim Talimatları (2 sayfalar)
Sayfayı Yazdır
CAUTION: When selecting a combination do not use birthday, phone number or other
predictable data that could give correlation between the user and combination. Once the
new combination has been set, do not share the combination. It is a secret.
• Valid Combination Entry - Double signal after valid six (6) digit combination is entered.
• Invalid Combination Entry - Triple signal indicates the old combination is still valid.
KEYPAD BACKLIGHT
• Press either lightbulb icon
• Panel keys will remain lighted for approximately
8 seconds
• The backlight feature will not adversely affect
battery life if done in conjunction with normal
anticipated keypad usage."
BATTERY LOW WARNING
• Repeated LED flashing and beeping during an
opening indicates that the battery is low and
needs immediate replacement.
• Uses one (1) 9-Volt alkaline battery only.
(Example: Duracell™ or Eveready™ alkaline
batteries.) The replacement of batteries at least once
annually is recommended.
If battery is depleted and will not allow lock to open,
follow instructions below. Lock contains a non-volatile
memory. Even with batteries removed, the lock will
retain all programming.
CHANGING YOUR BATTERY
1. Slide the keypad housing up and carefully pull away from
mounting surface to expose battery compartment.
2. Remove the old 9-Volt alkaline battery from the battery
compartment.
3. Remove the connector by unsnapping it from the two terminals on the top of the
battery.
CAUTION! Hold on to battery terminal connector to avoid pulling the wires out of
housing.
4. Press and hold the zero (0) key for ten (10) seconds before installing a battery.
5. Connect a new 9-Volt Alkaline battery to the battery clip.
6. Gently place the battery and the leads completely into the battery compartment.
7. Carefully position the keypad over the mounting screws and slide the keypad housing
down. Ensure there are no wires or cables trapped between the input pad and the safe
door. Pinched cables can result in a short circuit.
NOTE: The audit features, the software features, features associated with peripheral
devices and systems, optional interconnect devices and their associated features,
features involving the use of user keys, the duress feature, monitoring features, remote
features, and other additional features have not been evaluated by UL. Models 8130
and 3190 keypads are not certified by UL, are not UL listed, and not approved for UL
applications."
Mounting Instructions available at www.kaba-mas.com.
(P/N) 7030.0316 Rev A 02/17 • © copyright 2017
Kaba Mas LLC
Page 2 of 2