Asus TUF B360-PRO GAMING Manuel - Sayfa 14
Anakart Asus TUF B360-PRO GAMING için çevrimiçi göz atın veya pdf Manuel indirin. Asus TUF B360-PRO GAMING 40 sayfaları.
Sayfayı Yazdır
M.2 sockets (M.2_1; M.2_2)
These sockets allow you to install M.2 (NGFF) SSD
modules.
•
•
•
Intel
®
SATA6G_1-6)
These connectors connect to Serial ATA 6.0 Gb/s hard
disk drives via Serial ATA 6.0 Gb/s signal cables.
System panel connector (20-3 pin PANEL)
This connector supports several chassis-mounted
functions.
•
System power LED (4-pin PWR_LED)
This 4-pin connector is for the system power
LED. Connect the chassis power LED
cable to this connector. The system power
LED lights up when you turn on the system
power, and blinks when the system is in
sleep mode.
•
System power LED (2-pin or 3-1 pin PLED)
The 2-pin or 3-1 pin connector is for the system power LED.
•
Hard disk drive activity LED (2-pin HDD_LED)
This 2-pin connector is for the HDD Activity LED.
•
System warning speaker (4-pin SPEAKER)
This 4-pin connector is for the chassis-mounted system warning speaker.
•
ATX power button/soft-off button (2-pin PWR_SW)
This connector is for the system power button.
1-4
The M.2_1 socket supports M Key and 2242/2260/2280 storage devices
(both SATA & PCIE x2 mode), and supports data transfer speed of up to 16Gb/s.
The M.2_2 socket supports M Key and 2242/2260/2280/22110 storage devices
(PCIE x4 mode), and supports data transfer speed of up to 32Gb/s.
When a device in SATA mode is installed on the M.2_1 socket, SATA_2 port
cannot be used.
B360 Serial ATA 6.0Gb/s connectors (7-pin
M.2(SOCKET3)
SATA6G
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
Chapter 1: Product Introduction