Asus TUF B365-PLUS GAMING Manuel - Sayfa 13

Anakart Asus TUF B365-PLUS GAMING için çevrimiçi göz atın veya pdf Manuel indirin. Asus TUF B365-PLUS GAMING 37 sayfaları.
Ayrıca Asus TUF B365-PLUS GAMING için: Hızlı Başlangıç Kılavuzu (2 sayfalar), Hızlı Başlangıç Kılavuzu (2 sayfalar)

Sayfayı Yazdır
Asus TUF B365-PLUS GAMING Manuel
Q LEDs (BOOT_LED, VGA_LED, DRAM_LED, CPU_LED)
Q LEDs check key components (CPU, DRAM, VGA card, and booting devices)
in sequence during motherboard booting process. If an error is found, the
corresponding LED remains lit until the problem is solved. This user-friendly design
provides an intuitive way to locate the root problem within seconds.
The Q LEDs provide the most probable cause of an error code as a starting point for
troubleshooting. The actual cause may vary from case to case.
USB 3.1 Gen 1 connector (20-1 pin U31G1_56)
Connect a USB 3.1 Gen 1 module to this connector for
additional USB 3.1 Gen 1 front or rear panel ports. This
connector complies with USB 3.1 Gen 1 specifications
and provides faster data transfer speeds of up to 5
Gbps, faster charging time for USB-chargeable devices,
optimized power efficiency, and backward compatibility
with USB 2.0
M.2 sockets (M.2_1; M.2_2)
These sockets allow you to install M.2 (NGFF) SSD
modules.
•
•
•
®
Intel
SATA6G_1-6)
These connectors connect to Serial ATA 6.0 Gb/s hard
disk drives via Serial ATA 6.0 Gb/s signal cables.
1-4
The M.2_1 socket supports M Key and 2242/2260/2280 storage devices
(both SATA & PCIE x2 mode), and supports data transfer speed of up to 16Gb/s.
The M.2_2 socket supports M Key and 2242/2260/2280/22110 storage devices
(PCIE x4 mode), and supports data transfer speed of up to 32Gb/s.
When a device in SATA mode is installed on the M.2_1 socket, SATA_2 port
cannot be used.
B365 Serial ATA 6.0Gb/s connectors (7-pin
U31G1_56
PIN 1
USB3+5V
IntA_P2_SSRX-
IntA_P2_SSRX+
GND
IntA_P2_SSTX-
IntA_P2_SSTX+
GND
IntA_P2_D-
IntA_P2_D+
M.2(SOCKET3)
SATA6G
GND
RSATA_TXP
RSATA_TXN
GND
RSATA_RXN
RSATA_RXP
GND
Chapter 1: Product Introduction
USB3+5V
IntA_P1_SSRX-
IntA_P1_SSRX+
GND
IntA_P1_SSTX-
IntA_P1_SSTX+
GND
IntA_P1_D-
IntA_P1_D+
GND