Advance acoustic SC6000 Kullanım ve Bakım
Yıkayıcı Advance acoustic SC6000 için çevrimiçi göz atın veya pdf Kullanım ve Bakım indirin. Advance acoustic SC6000 2 sayfaları.
Sayfayı Yazdır
ATTENTION! Do not use the machine before you read and understand the Instructions for Use Manual.
1. Check the battery charge gauge
2. E-stop icon appears on display
(and if necessary re-charge).
6. Install squeegee.
7. As necessary adjust the tilt angle of squeegee so blade has uniform contact
9. Verify water is in the solution tank.
10. Remove and periodically clean
14. Lift side skirts when double
15. Ensure that the deck and squeegee
scrubbing is needed.
9435 Winnetka Avenue North
240 Superior Boulevard
Brooklyn Park, MN 55445
Mississauga, Ontario, Canada L5T 2L2
www.advance-us.com
www.nilfisk-advance.ca
Phone 800-850-5559
Phone 800-668-8400
Fax 800-989-6566
Fax 800-263-5111
3. Check that battery cables are
when E-stop switch is engaged.
connected.
Twist E-stop switch to enable
machine function.
tip to tip. Verify squeegee casters rotate and pivot freely and are in contact
with the floor when squeegee is in the down position.
11. Verify vacuum filter and screen
solution filter screen.
16. Adjust water flow.
are moving down when pressing
the button.
USE AND CARE
SC6000
™
4. Recovery tank seal cover must be
correctly installed and in good
condition. Clean and empty
debris tray.
8. Open brush door compartment and check brushes for debris.
12. Install brushes by positioning
are clean.
against guides. Press brush install
button.
17. Adjust detergent concentration.
5. Inspect the squeegee blades/skirts
for damage.
13. Adjust side skirt heights and inspect
blades for wear or damage.
18. Press "i" scroll down to faults and
press ">" button to view faults.