Asus Z97-C Manuel - Sayfa 27

Anakart Asus Z97-C için çevrimiçi göz atın veya pdf Manuel indirin. Asus Z97-C 48 sayfaları.

1.2.7

Jumpers

Clear RTC RAM (3-pin CLRTC)

clear the CMOS memory of date, time, and system setup parameters by erasing the

CMOS RTC RAM data. The onboard button cell battery powers the RAM data in

CMOS, which include system setup information such as system passwords.

I II

Z97-C

Z97-C Clear RTC RAM

To erase the RTC RAM:

Turn OFF the computer and unplug the power cord.

Move the jumper cap from pins 1-2 (default) to pins 2-3. Keep the cap on pins 2-3

for about 5-10 seconds, then move the cap back to pins 1-2.

Plug the power cord and turn ON the computer.

Hold down the <Del> key during the boot process and enter BIOS setup to re-

enter data.

Except when clearing the RTC RAM, never remove the cap on CLRTC jumper default

position. Removing the cap will cause system boot failure!

again to clear the CMOS RTC RAM data. After clearing the CMOS, reinstall the

battery.

system failure due to overclocking, use the CPU Parameter Recall (C.P.R.) feature.

Shut down and reboot the system, then the BIOS automatically resets parameter

settings to default values.

ASUS Z97-C

CLRTC

1 2

2 3

Normal

Clear RTC

(Default)

1-13