Daewoo electricals AVS1349 Kullanıcı Kılavuzu - Sayfa 5
Konuşmacılar Daewoo electricals AVS1349 için çevrimiçi göz atın veya pdf Kullanıcı Kılavuzu indirin. Daewoo electricals AVS1349 7 sayfaları. Large bluetooth tube speaker
Sayfayı Yazdır
Before the first time you use your Speaker
Please read these operating instructions thoroughly and keep them in a safe place for future
reference.
Remove all packing materials and discard responsibly.
Charging the internal Battery
Before use, please ensure that the internal rechargeable battery is fully charged as follows:
1. Insert the Micro USB plug (14) of the USB to Micro USB Charging Cable (13) into the Micro USB
Charging Port (10) on the speaker.
2. Insert the large USB plug into a suitable USB charger (not supplied) rated to at least 1 Amp.
(most chargers are rated 1 Amp or above).
3. Whilst the Speaker is on charge, the LED (9) Indicator will glow red, once the internal battery is
fully charged the LED will go out.
NB Charging time will take approximately 2-3 hours – remove the charging cable once the
speaker is fully charged.
NB If desired the USB supply can be left connected to the unit if it is to be used for a long
period of time.
Operating Instructions
Using the Bluetooth Mode
1. Power up the speaker by moving the ON/OFF switch (6) to the 'ON' position.
2. Once the speaker has powered up the LED (9) will flash blue.
3. Enable the Bluetooth mode on your Phone, Tablet or other Bluetooth compatible device and set it
to search.
4. Select 'AVS1349' from the search results found by your device which will now pair with the
speaker. Once the device has paired with the speaker a beep will be heard.
6. Enable the music player on your Phone, Tablet or other device you are using.
7. Press the PLAY/PAUSE button
8. Briefly press the Skip Forward
played.
9. Press and hold the Skip Forward
the volume level.
10. Alternatively use your devices controls in the usual manner.
Using the AUX/LINE Input
The AUX/LINE Input allows a direct wired connection of an external audio device (such as a mobile
phone, music player, etc.) via a 3.5mm jack socket input on the control panel.
1. Power up the speaker by moving the OFF/ON switch (6) to the 'ON' position.
2. Insert the 3.5mm jack lead (16) into the AUX IN socket (8). The speaker will automatically detect
the lead, alternatively press the mode M button (2) briefly until the AUX input is selected.
3. Press and hold the Skip Forward
the volume level.
(5) to start and stop (pause) the connected device playing.
(4) and Skip Back
(4) and Skip Back
(4) and Skip Back
(3) buttons to change the track being
(3) buttons to increase and decrease
(3) buttons to increase and decrease
5