1byone HDTV Antenna Hızlı Başlangıç Kılavuzu - Sayfa 2

Anten 1byone HDTV Antenna için çevrimiçi göz atın veya pdf Hızlı Başlangıç Kılavuzu indirin. 1byone HDTV Antenna 2 sayfaları.

1byone HDTV Antenna Hızlı Başlangıç Kılavuzu
Preparing to Connect
1. Check your TV's type.
Smart TVs and HDTVs can connect to the antenna directly.
A digital converter box may be needed for TVs made prior to
2009. Please provide your own box if needed.
2. Find the location of your local broadcast towers to find the best
mounting position for your antenna.
Check your house's reception using the following websites:
FCC: www.fcc.gov/media/engineering/dtvmaps
TV Fool: www.tvfool.com/
Antenna Web: antennaweb.org/Address
- 1 -
Connecting the Antenna
Place the antenna in a window facing the direction of the TV
broadcast tower. Height and direction of the antenna can affect
reception strength.
Note: Buy a longer coaxial cable if your TV doesn't have enough
space for an antenna behind it.
Digital Antenna
Direct Connection to TV
35 Mile Range
If your house is within 35 miles of the tower
Digital Antenna
SMART TV HDTV
USB Cable
35-80 Mile Range
Amplifier
(for Enhanced Gain and Range)
If your house is within 35-80 miles of the tower
Digital Antenna
TV Without HD Tuner
USB Cable
Power Adapter
Amplifier
Digital STB
If your TV requires a digital converter box
Note: If you have an amplified antenna, first use with the amplifier
turned off. If reception is not good, turn on the amplifier to
improve reception and rescan for channels.
- 2 -
Scanning for Channels
After connecting the antenna to the TV, use the TV remote
control to scan for channels.
Here are generic steps to run a channel scan:
1. Run the "Scan" function on your TV by pressing the Menu
button on the remote control and find "Scan" or "Setup."
• Make sure the TV is set to "Air" or "Antenna" instead of "Cable."
HDTV
2. Below is a basic channel scan menu for your reference. Please
remember that different televisions have different setup
processes.
3. You will receive digital signals through the antenna once the
scan is complete.
• Consult your TV's manual or ask the manufacturer if you do not
know how to access the channel scan function.
Note: Rescan for channels periodically, especially if you
performed the initial scan on a cloudy day or during inclement
weather as you might get some new stations you couldn't pick
up during bad weather.
- 3 -